Site Owners Forums - Webmaster Forums - View Single Post

Zetar · 10-03-2013, 08:41 AM

Hi
Yes,your point is great, if you are intrested in injection molding,please scan the next.
The mold basically consists of a sprue, a runner, a cavity gate, and a cavity. The sprue is the channel located in the stationary platen that transports the melt from the plasticator nozzle to the runner. In turn, melt flows through the runner and gate and into the cavity. With a single-cavity mold, usually no runner is used, so melt goes from the sprue to the gate.
We are special in mannufacturing injection moulding

10-03-2013, 08:41 AM	#11
Zetar Registered User Join Date: Sep 2012 Posts: 4	Hi Hi Yes,your point is great, if you are intrested in injection molding,please scan the next. The mold basically consists of a sprue, a runner, a cavity gate, and a cavity. The sprue is the channel located in the stationary platen that transports the melt from the plasticator nozzle to the runner. In turn, melt flows through the runner and gate and into the cavity. With a single-cavity mold, usually no runner is used, so melt goes from the sprue to the gate. We are special in mannufacturing injection moulding __________________ Zetar Industry ( To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ), Located in Shanghai China (a very big modern city), is specializing in manufacturing Injection Molding, Injection Moulding.